Product Description
With the patented Tormek DBS-22 attachment for drill bits you can now sharpen your drill bits with the highest precision. The optimal point and clearance angles can be set according to match the requirements of both the drill size and material. Now you can completely restore worn drills as well as broken drills to a perfect shape.
The jig will create a 4-facet point, which gives the ideal cutting performance since the chisel edge gets a point instead of being almost flat, as on many drills. A 4-facet point will not walk and the thrust force required is considerably reduced compared to a conventional cone point drill.
A precision sharpened 4-facet point generates less heat and the life of the drill is therefore also prolonged. Independent tests show that a Tormek sharpened drill lasts up to 4 times longer than a brand new conventional drill bit.
By working with the laws of physics and cooling the edge continuously, the risk that the steel becomes overheated and loses its hardness or gets micro cracks is eliminated. You have full control all the time and can see how the sharpening proceeds. Sweden
Key Features:
4-Facet Point - The chisel edge comes to a point and will not walk. Bores a round, straight hole with close tolerances. Always equal cutting edges .
Always Equal Cutting Edges - The two cutting edges are sharpened symmetrically and work in perfect unison which prolongs the life of the drill.
Sharpens All Point Angles - Jig can be set at any angle between 90° and 150°
Always The Right Clearance Angle - The optimal clearance angle can be set according to each drilling requirement to 7°, 9°, 11°or 14°.
Sharpens All Drill Sizes - The same drill holder copes with drills from 3 mm (1/8”) to 22 mm (7/8”). No change of chuck required.
Specifications
No specifications available for this product
Manuals
No Manuals available for this product
Warranty & Certifications
No Manuals available for this product
