Product Description
Easy Wood Tools 7500 Full-Size Detailer, Handled. Designed with a reduced angle, the long cutting edges making the tool less aggressive as it is plunged into the work. In use the Detailer performs nearly as though a bevel is being rubbed. This angle reduction makes the tool very user friendly and you can feel safe that the trailing long cutting edge will not be sucked into the wood.
The user should not plunge the tool so deep into the work so that both sides of the cutter are engaged too greatly at one time as this would cause too much force on the setup.
With a Detailer, extraordinary results can be had on spindle and end grain work with most all domestic woods. When turning exotics, as with all tools, extra measures must be taken and raising the handle is generally preferred.
Use the Detailer to turn: Finials; Coves; Beads; Detail Grooves; Bowl Tenons; Dovetail cuts for chuck jaws - inside and out; Undercutting; and detail cuts where the cutter will physically fit.
The Full Size Detailer has a hard maple handle with an amber dye that is about 16" long, and a 1/2" wide by 8-1/2" long stainless steel blade. Overall tool length is approximately 24-1/2". Includes Ci4 Diamond shaped carbide cutter (#99349). USA
NOTE: The carbide Diamond Cutter works with Easy Wood Detail Tools only.
Specifications
No specifications available for this product
Manuals
No Manuals available for this product
Warranty & Certifications
No Manuals available for this product
